This build may be outdated.

It was made in an earlier patch, so some upgrades may perform differently today.

Driller loadout · Season 1

MountAndDewMe’s One Man Army Flamer

by Kidxfury · Updated 2 Jan 2022

Primary
CRSPR Flamethrower
Secondary
Experimental Plasma Charger
Throwable
—
Use this build Salutes · 1

The kit

Weapons & gear

Primary · Heavy Weapon

CRSPR Flamethrower

  1. T1 · B High Pressure Ejector +5m Flame Reach
  2. T2 · B Triple Filtered Fuel +10 Heat per Particle
  3. T3 · B Sticky Flame Slowdown Increases Sticky Flames' slow from 10% to 55%
  4. T4 · C More Fuel +75 Max Fuel
  5. T5 · B Targets Explode If the direct stream kills a Burning enemy, there's a 50% chance that they will explode and deal 55 Fire Damage and 55 Heat to all enemies within a 3m radius.
  6. OC Sticky Fuel Unstable · +5 Sticky Flames damage, +6 sec Sticky Flames duration, -25 Tank Size, -75 Max Fuel
Secondary · Pistol

Experimental Plasma Charger

  1. T1 · B Larger Battery +24 Battery Size
  2. T2 · A Heat Shield x0.4 Heat per Second when fully charged
  3. T3 · A Improved Charge Efficiency -2 Ammo per Charged Shot
  4. T4 · B High Density Battery +24 Battery Size
  5. T5 · B Thin Containment Field Shoot the Charged Shot with a Regular Shot before it impacts anything to make it detonate for 240 Damage and carve terrain within a 3m radius. Additionally: x0.8 Heat per Regular Shot and x0.8 Heat per Charged Shot.
  6. OC Energy Rerouting Clean · +16 Battery Size, x1.5 Charge Speed.
Equipment

Reinforced Power Drills

  1. T1 · B Hardened Drill Tips Drill faster
  2. T2 · A Magnetic Refrigeration Faster cooling for the drills when not in action
  3. T3 · A Supercharged Motor Drill faster.
  4. T4 · A Increased Tank Pressure Carries more fuel
Equipment

Satchel Charge

  1. T1 · B Extra Satchel Charge Can carry one more explosive pack.
  2. T2 · A Kill Switch Disarm and pick up an unused charge.
  3. T3 · A Extra Satchel Charge Can carry one more explosive pack.
  4. T4 · C Rock Mover Blast carves a much larger area.
Equipment

Heavy Drill Suit

  1. T1 · A Improved Generator Shield begins to regenerate sooner.
  2. T2 · B Healthy Max health increased
  3. T3 · A Temperature Insulation For those who prefer it medium rare. Flames will inflict half as much damage.
  4. T4 · C Breathing Room Temporary invulnerability after being revived.

Field notes

Loadout guide

Introduction

Need to carry your team? Tired of waiting for your scout to mine minerals? Tired of having to rely on your teammates to deal with swarms, glyphids, mactera? Need more CC? Want a class that does it all? Enter the One Man Army Driller Build.     This is also a setup that I use and works for modded Hazard 6, x2 enemies difficulty. Of course, it also works on other types of modded difficulties and the regular vanilla game in Hazard 5 and below.

Flamethrower

For T1, you really don't need magazine size if you know how to reload animation cancel. You will absolutely get more value from having more range instead. For T2, your choices are either Triple Filtered Fuel (+10 Heat) or Sticky Flame Duration (+3 seconds). Prior to Rival Tech enemies, there wasn't really any reason for you to ever take T2 heat because you should very rarely actually apply your flames directly to an enemy if you're actually utilizing the sticky flames playstyle properly. However since Rival Tech enemies can appear in the regular missions as hacking events, it is a good choice to take T2 Heat. If you didn't know, RivalTech enemies instantly die after being fully ignited. Since your goal is to be the One Man Army Driller, taking T2 heat is a good option to quickly deal with Rival Tech. But sticky flame duration is also as good of an option. So it's your choice of preference here between the two. I still use Sticky Duration whenever I play Haz 6x2 since I play with a competent team that I'm confident in being able to handle the hack events/prospectors. For T3, absolutely no-brainer here. Don't even bother playing the sticky flames playstyle if you don't take this slowdown mod. For T4, just pick ammo. There's no other better option in this tier. For T5, if you do the sticky flames playstyle properly (being proactive rather than reactive) you will very rarely ever get to take advantage of Heat Radiance because you won't be in range most of the time. You will get more value using Targets Explode which is insanely good against Brood Nexuses (if you time it properly you can insta kill all of the swarmers after it pops), naedocytes, and shockers making it even more ammo efficient

EPC

Is it still worth it to EPC mine even with the nerfs after U34?

Absolutely yes. If you think about it, most missions you'll do you actually have quite a bit of extra nitra that you end up calling an extra resupply or two before calling the Droppod. So losing some minerals from scattering is negligible. I actively still EPC mine every single nitra, gold, objective collectibles, and other resources I see even with them scatterring around.

Can you still use Heat Pipe even with the nerfs?

The short answer is that Heat Pipe is still very much viable contrary to what a lot of people say. See this video: https://www.youtube.com/watch?v=QixUl0WHWFk The 21122 Energy Rerouting build shown in this build has quite a lot of ammo efficiency. However, you can definitely opt to switch to 21122 Heat Pipe if you absolutely want to take ammo efficiency to the max. Otherwise, below are some alternative TCF builds.

Alternative TCF EPC Builds

These are alternative TCF builds you can take.

Going down from a scale of less ammo efficient, but faster charge speed to more ammo efficient, but slower charge speed:

Less Ammo Efficient, Faster Charge Speed 

  • 2X222 Energy Rerouting: 20 to 23 TCF shots, 375% Charge Speed
  • 21222 Heat Pipe: 24 to 28 TCF shots, 325% Charge Speed
  • 2X122 Energy Rerouting: 26 to 30 TCF shots, 150% Charge Speed
  • 21122 Heat Pipe: 33 to 42 TCF shots, 130% Charge Speed (this is my build)

More Ammo Efficient, Slower Charge Speed

* The upper number of the TCF shots range is the maximum number of TCF shots possible if you triggered all your TCF shots using the impact axe technique (which effectively lowers the cost of each TCF shot by 1 ammo) which I showcased in the video. The lower number of the range is if you did not utilize the axe technique at all so each TCF shot costed the full charged shot ammo cost + 1 normal shot ammo cost.

Which TCF build should I use?

It's completely up to your playstyle, what you prioritize, and what you're willing to compromise. 

  • If you don't really do TCF shots as much or at all to EPC mine, maybe you only occasionally use TCF for mactera, and/or maybe you use normal shots more or less the same amount as TCF shots; and you want fast charge speed, I recommend the first build. 
  • If you still want fast charge speed but want a bit more ammo efficiency than the first build, then use the second build. 
    • Both the first build and second build's charge speed don't feel that much different from each other because they're already so fast.
    • However, this second build is a bit slower overall because of Heat Pipe's inability to do consecutive TCF shots. 
    • Here's a short video that shows the charge speed of this build: https://youtu.be/LZ-LDzqCqvw
  • If you don't mind sacrificing charge speed for further more ammo efficiency, then use the third build. This is a pretty good starter and would say that this is enough for most people that want ammo efficiency to use TCF shots both to EPC mine and also in combat extensively.
  • If you really want to maximize ammo efficiency and you're the type of person to basically EPC mine all the nitra and resources, use it quite a lot in combat, and also for fast terrain clearing, then use the fourth build. It is extremely hard to run out of ammo with this build and often times you will be over half ammo by the time you need to resupply for your Flamethrower. If this feels wasteful to you, I suggest going for the 3rd build.

If you're used to the faster normal shot velocity in T2 for timing your TCF shots, you will have to relearn the new timings if you switch to T2 Heat Shield. Personally, it only took me like 3-6 games to get used to the new timing so it's not really a big switch.      If you're used to faster charge speed and want to switch over the slower charge speed builds, then you also have to retrain your muscle memory. Again, it's not too big of a switch and personally only also took me a few games to retrain my muscle memory.      If you're used to standing still while charging up your TCF shot because you relied on fast charge speed and now you're worried that the slower charge speed means you might take damage while charging a shot, then this isn't too big of a problem you just have to adapt to a new movement/playstyle to mitigate this. I demonstrated this during the combat TCF shots in this video; basically while charging up a shot just keep kiting/jumping/moving, and then at the last 1-2 charge ticks stop moving to take aim.      Reminder again that when you do use a Heat Pipe build, you lose the ability to do consecutive TCF shots. You can adapt to a new playstyle to mitigate this as much as possible, but maybe pumping consecutive TCF shots is something you actually want the ability to do. Try it out and see if you're fine compromising without it for the other benefits that Heat Pipe gives.

Perks

These are the perks I specifically use for Driller in Hazard 6x2. If you're playing on Haz5 and below, you can switch any of the passive perks into your own personal choice. For modded difficulty, I highly suggest Vampire (for synergy with Iron Will) and Thorns. For the active perks, Dash is the one that I recommend to be a mandatory pick even at Haz5 and below. It's just a matter of "Dash is way too good, there's no reason not to take it". Iron Will is necessary for Haz6x2 but not that necessary in Haz5 and below if you can normally carry missions anyway. If you usually carry Haz5, then Field Medic is a good alternative active perk when joining random public matches. If you're not gonna use Iron Will, you don't need Vampire.

  • Passive Perks:
    • Thorns
    • Vampire
    • Born Ready
  • Active Perks
    • Dash
    • Iron Will

Misc

  • Pickaxe: Take the damage mod
    • The biggest weakness of sticky flames is single target damage. The damage mod is really good against big enemies such as Oppressors and Praetorians.
  • Grenades: Impact Axe
    • I think they're singlehandedly the best grenade even when compared to other class grenades

Squad chatter

Comments