This build may be outdated.

It was made in an earlier patch, so some upgrades may perform differently today.

Scout loadout ยท Patch 39

How to Cook Dreadnoughts ๐Ÿณ๐Ÿ”ฅ

by biossauro ยท Updated 29 Aug 2025

Primary
DRAK-25 Plasma Carbine
Secondary
Nishanka Boltshark X-80
Throwable
โ€”
Use this build Salutes ยท 2

The kit

Weapons & gear

Primary ยท Assault Rifle

DRAK-25 Plasma Carbine

  1. T1 ยท A High-Volume Plasma Feed +4 Rate of Fire
  2. T2 ยท B Increased Particle Density +2 Direct Damage
  3. T3 ยท B Gen 2 Cooling System x1.5 Cooling Rate, x0.7 Cooldown Delay
  4. T4 ยท B Plasma Splash -5 Direct Damage, +5 Area Damage in a 1m radius
  5. T5 ยท B Thermal Feedback Loop When the Heat Meter is greater than 50%, the Rate of Fire is increased by +5 (up to a maximum of 20 RoF).
  6. OC Conductive Thermals Balanced ยท Each hit inflicts two stacking Status Effects; one decreases the Fire, Frost, and Electric-element resistances by 5% per stack and the other multiplies the Ignite, Douse, Freeze, and Unfreeze temperatures by x0.95 per stack (max x0.21464 at 30 stacks). In exchange: -3 Damage and +36.67% Heat per Shot.
Secondary ยท Crossbow

Nishanka Boltshark X-80

  1. T1 ยท C Special Bolt: Taser Special Bolt: 15 Direct Damage, 10 Area Damage, 12 bolts, 12 sec effect duration. If you hit an enemy, it will have its movespeed slowed by 50% and take an average of 16 Electric Damage per Second. If you shoot a second Taser bolt within 6m of the first one, an electric beam will arc between the two bolts that slows enemies by 80% and does 30 Electric DPS. Taser Bolts are not retrievable.
  2. T2 ยท B Increased Quiver Capacity +7 Max Ammo
  3. T3 ยท A Stabilizing Arm Brace -0.4 Reload Time, -0.4 Ammo Swap Time
  4. T4 ยท A Battle Frenzy After killing an enemy, gain +50% Movement Speed for 2.5 seconds
  5. T5 ยท A Potent Special Bolts x1.25 Special Effect Duration
  6. OC Fire Bolt Balanced ยท Hitting an enemy directly with a normal arrows will start igniting it at an average of 16 Heat/sec for 6 seconds. Enemies within 2m of the arrow will start to ignite at 20 Heat/sec for 6 seconds. These effects stack with themselves if you fire multiple arrows. In exchange, -50 Direct Damage. These bolts are no longer retrievable.

Field notes

Loadout guide

How to Cook Dreadnoughts ๐Ÿ”ฅ

Recipe

Step-by-Step

  1. Equip DRAK-25 Plasma Carbine with the Conductive Thermals OC and the Plasma Splash upgrade (T4B). Everything else barely matters.

  2. Apply stacks from Conductive Thermals onto a Dreadnought.

  3. Ignite it, electrify it, and watch the damage pile up!

  4. Bon appรฉtit!

Note on Volatile Bullets

Thanks to the Conductive Thermals OC, your Gunner can effectively use Volatile Bullets (VB) during Elimination missions. While it may be somewhat overkill, this combo deals heavy chunks of damage to Dreads.


P.S.: I recently came across this build and guide on Steam, both made by Xenon. It's much more detailed than mine, so be sure to check it out!

Squad chatter

Comments