Have feedback on the new Karl.gg? Tell us what’s working, what’s getting in your way, or what you’d like to see improved on Discord. Please keep loadout posts focused on builds so players can find them easily. Share feedback on Discord

This build may be outdated.

It was made in an earlier patch, so some upgrades may perform differently today.

Gunner loadout · Season 3

"A Little More OOMPH" - NotSenz' High-Damage Minigun/BRT7 Loadout

by NotSenz · Updated 27 Mar 2023

Primary
"Lead Storm" Powered Minigun
Secondary
BRT7 Burst Fire Gun
Throwable
Cluster Grenade
Use this build Salutes · 1

The kit

Weapons & gear

Primary · Heavy Weapon

"Lead Storm" Powered Minigun

  1. T1 · C Improved Platform Stability x0.25 Base Spread
  2. T2 · B High Velocity Rounds +2 Damage per Pellet
  3. T3 · A Hardened Rounds +200% Armor Breaking
  4. T4 · C Magnetic Bearings Increases how long the Minigun stays at Max Stability from 0.5 sec to 1.25 sec, +1 second spindown time
  5. T5 · B Cold As The Grave Every kill subtracts 0.6 Heat from the Heat Meter (maxes at 9.5 Heat) and thus increases the firing duration before overheating
  6. OC A Little More Oomph! Clean · +1 Damage per Pellet, -0.2 spinup time
Secondary · Pistol

BRT7 Burst Fire Gun

  1. T1 · B Floating Barrel x0.6 Spread per Shot, -30% Base Spread
  2. T2 · A Recoil Dampener x0.5 Recoil
  3. T3 · B Increased Caliber Rounds +3 Direct Damage
  4. T4 · C Hollow-Point Bullets +40% Weakpoint Bonus
  5. T5 · B Longer Burst +3 Bullets per Burst, -0.02 sec delay between bullets during burst
  6. OC Lead Spray Unstable · x1.5 Direct Damage, x4 Base Spread
Equipment

Zipline Launcher

  1. T1 · B Upgraded Connection Joint Increases the operational angle of the zipline
  2. T2 · A Reinforced Cable Zipline can span a greater distance
  3. T3 · B Increased Motor Traction Can reach a higher top speed on the zipline
Equipment

Shield Generator

  1. T1 · B Improved Projector Shield protects a larger area.
  2. T2 · B Larger Capacitors Shield lasts longer.
  3. T3 · B Lasting Effect The shield's protective properties linger for a few seconds after you leave the shield.
Equipment

Reinforced Impact Suit

  1. T1 · A Improved Generator Shield begins to regenerate sooner.
  2. T2 · B Healthy Max health increased
  3. T3 · A Reactive Armor Fire in the hole! Fancy Reactive Armor plating takes half the sting out of any explosions.
  4. T4 · C Breathing Room Temporary invulnerability after being revived.
Throwable

Cluster Grenade

When one grenade just won't cut it. This thing is basically Armageddon in the palm of your hand.

Field notes

Loadout guide

CLICK HERE FOR THE YOUTUBE VIDEO


Hello Miners and Rock and Stone!

All of the information inside of this build is covered inside of the YouTube video linked above, so please go give it a watch! I just also made this guide as a way for people to have a more interactive and detialed platform to see the build.


Build Information:

“A Little More OOMPH” is the name of my general-use build for the “Lead Storm” minigun in Deep Rock Galactic. I tend to bring this build with me for most of my Hazard 5 missions as well as the Deep Dives. It especially comes in handy when I require a lot of firepower in one concentrated location. This build is very helpful to the team, especially whenever there is a single, high health target that needs to be engaged, such as Dreadnoughts, Oppressors, or Detonators. Also, because of the way that the minigun is built, enemies that are normally tougher and need more time than the average grunt, such as Praetorians and Grunt Guards, get taken care of very quickly with this build. Also, like I mentioned previously, the BRT7 provides very high damage for these kinds of enemies, as well, as long as they’re hit in their weak point.


MINIGUN OVERCLOCK

For the Minigun, I use the “A Little More OOMPH overclock, which is where the build gets its name from. This overclock increases the overall damage of the minigun by +1, as well as decreases the spin up time, which is the time that the minigun needs to spin before firing, by 0.2 seconds. I know 0.2 seconds doesn’t sound like a lot, but really it’s a decrease of almost 30% from the baseline.


MINIGUN MODIFICATIONS

TIER 1:

I chose the “Improved Platform Stability” mod that decreases the base spread from 100% to 25%. I’m not exactly looking for the minigun to perform like a laser beam, however, this mod does provide a substantial increase in accuracy and makes it easier to hit at what I'm aiming at.

TIER 2:

I chose the “High Velocity Rounds” mod which increases the damage from 11 to 13. I chose this mainly to build on the small damage boost that is provided by the overclock. The maximum ammo for the minigun is 2400 rounds, so I personally don’t have any issues with running out of ammo, however, if you do, then the other mod for tier 2 increases the maximum ammo to 3000.

TIER 3:

I chose the “Hardened Rounds” mod, which adds +200% to the armor breaking capability of the weapon. I really like this mod because I can engage enemies that I would otherwise have issues with, such as Grunt Guards, Praetorians, and Mactera Brundles. This also helps since most enemies in the game have at least light armor, so having this mod installed will make cracking that armor easier, no matter where I hit them.

TIER 4:

I chose the “Magnetic Bearings mod, which increases the time the barrels take to stop spinning by 33%. This specifically makes it easier for me to stop and start firing again, which I do a lot. For those of you who don’t know, when the barrels stop spinning, the player is required to spin up the weapon again before it can fire, so having the barrels take a longer time to stop spinning is a benefit. Although I personally chose the Magnetic Bearings mod, I honestly would leave this one up to personal choice. All three of the options in this tier are very good.

TIER 5:

I chose the “Cold As The Grave” mod, which cools the gun slightly for every kill I get. Overheating is sometimes an issue for me personally, so I like this mod because, simply put, as long as I'm killing enemies, the gun will slightly cool and take longer to overheat.


BRT7 OVERCLOCK

The overclock that I use for the BRT7 is “Lead Spray”, which multiples the damage by 1.5, while also multiplying the base spread by 4. I personally like using this overclock compared to other weapons like the Bulldog Revolver, because I personally feel that even with the +300% base spread, using the BRT7 is more controllable than the Bulldog, and it also has higher damage, even compared to Elephant Rounds.


BRT7 MODIFICATIONS

TIER 1:

I chose the “Floating Barrel” mod to negate some of the drawbacks from the x4 base spread. This brings the base spread down to 280% from 400%, as well as brings the spread per shot down from 100% to 60%.

TIER 2:

I chose the recoil dampener mod, which decreased the recoil of the pistol by 50%. I should mention, recoil and base spread are not the same thing. While the recoil mod makes the pistol easier to shoot, it doesn’t directly counteract the base spread debuff that the Lead Spray overclock provides. I would leave this tier up to personal preference, though. All three of these mods aren’t excellent, but not horrible either.

TIER 3:

I chose the Increased Caliber Casings mod, which bumps the damage from 32 to 36. Keep in mind that this damage is per-bullet, so taking into consideration the three round burst aspect, the total damage is increased from 96 to 108.

TIER 4:

I feel this is the most important mod for this gun, I chose the “Hollow Point Bullets” mod, which gives a +40% weak point damage bonus. This means that, as an example, for every 100 damage inflicted on an enemy, if the bullets hit the enemy's weak point, then there will be +40 extra damage applied in addition to the base damage.

TIER 5:

I chose the “Longer Burst” mod, which increases the burst size from three to six. I chose this one personally because usually, whenever I'm using the pistol, I’m close enough to the enemy that having the extra fire rate helps with maximizing the damage in the minimum amount of time. Furthermore, I don’t feel that the other mod on this tier that adds stun damage is useful for this build, because a lot of the larger enemies such as Oppressors and Praetorians have stun resistance.


PERKS

For my passive perks, I use Thorns to get rid of the small enemies that are hard to hit whenever they attack me, such as Swarmers and Shockers. I also have “Born Ready” to ensure that I have a full pistol magazine at all times, and finally Resupplier to get both more health and ammunition whenever I use a resupply.


For my active perks I personally use Iron Will and Field Medic. Just because I’m a huge fan of this combo. A lot of people feel that Iron Will is overrated, however. So, a great substitution instead would be “Dash”, to get yourself out of those sticky situations.

Squad chatter

Comments