This build may be outdated.

It was made in an earlier patch, so some upgrades may perform differently today.

Scout loadout · Season 2

Anti-rival scout

by Rug Dealer · Updated 18 Oct 2022

Primary
DRAK-25 Plasma Carbine
Secondary
Jury-Rigged Boomstick
Throwable
—
Use this build Salutes · 3

The kit

Weapons & gear

Primary · Assault Rifle

DRAK-25 Plasma Carbine

  1. T1 · A High-Volume Plasma Feed +4 Rate of Fire
  2. T2 · A Larger Battery +200 Battery Capacity
  3. T3 · B Gen 2 Cooling System x1.5 Cooling Rate, x0.7 Cooldown Delay
  4. T4 · A Overcharged PCF 15% Chance per bullet to inflict an Electrocute DoT which does 22.5 Electric Damage per Second and slows enemies by 80% for 6 seconds.
  5. T5 · B Thermal Feedback Loop When the Heat Meter is greater than 50%, the Rate of Fire is increased by +5 (up to a maximum of 20 RoF).
  6. OC Thermal Exhaust Feedback Unstable · Starting when the Heat Meter reaches 50%, the next four intervals of 10% on the Heat Meter each add 3 Fire-element Direct Damage and 3 Heat, up to +12 Damage/Heat when the Heat Meter is greater than 90%. In exchange, x1.3 Overheat Duration and x1.2 Heat per Shot.
Secondary · Shotgun

Jury-Rigged Boomstick

  1. T1 · A Expanded Ammo Bags +8 Max Ammo
  2. T2 · A Double Trigger +7.5 Rate of Fire
  3. T3 · C High Capacity Shells +3 Pellets per Shot
  4. T4 · A Super Blowthrough Rounds +3 Penetrations
  5. T5 · C White Phosphorous Shells Convert 50% of Pellet damage to Fire element and add 50% of the Damage per Pellet as Heat which can ignite enemies
  6. OC Jumbo Shells Unstable · +8 Damage per Pellet, -10 Max Ammo, +0.5 Reload Time

Field notes

Loadout guide

Abstract

  • This build is meant for Rival Presence and Industrial Sabotage missions. The DRAK-25 is good for taking out sniper turrets, patrol bots, and shredders, while the Boomstick decimates burst and repulsion turrets and patrol bots at close range.

DRAK-25 Plasma Carbine

  • Thermal Exhaust Feedback applies to the DRAK-25 when the heat meter is over 50% full, with more heat applied the closer it gets to 100%. When firing at bots to ignite them, pay attention to the heat meter to keep it between 50% and 100%.
  • When engaging sniper turrets, you can spray until the heat reaches nearly 100%, then duck for cover while recovering from heat.
  • If you have the Weapon Heat Crosshair mod, it is very useful for keeping the heat meter between 50% and 100% without overheating.
  • Overcharged PCF is effective against shredders, since the electric DoT is guaranteed to kill.

Jury-Rigged Boomstick

  • This is capable of instantly killing burst and repulsion turrets at close range. Get up close so that the turret fills the shotgun reticle.
  • With the way heat applies, a turret can be ignited even with its shield up. Take advantage of this, since it cannot shoot until its shield is down.
  • Patrol bots can be inconsistent and generally take two quick shots at very close range to ignite.
  • With Super Blowthrough Rounds, the Boomstick is also effective against groups of bugs.

Squad chatter

Comments